ALKALINE SOAK CLEANERS
SURFOLIN SK 40
  • Heavy duty alkaline soak cleaner for ferrous and nonferrous metals.
SURFOLIN U 25
  • High efficiency cleaner suitable for ferrous and nonferrous metals including zinc base die casting.
  • Designed for use as soak and electrolytic cleaner.
SURFOLIN EC 54
  • A versatile liquid soak cleaner used along with sodium hydroxide for efficient soak cleaning of steel.
  • Can replace solvent cleaning.
SURFOLIN POWERPACK
  • Increases the efficiency of any cleaning bath to a considerable extent.
  • Can be added to any alkaline soak cleaner.
SURFOLIN SK 100
  • The cleaner has long service life with very good cleaning effect.
  • It removes grease, soil, weak scale layers and leaves the surface active and bright.
ALKALINE ELECTROLYTIC CLEANERS
SURFOLIN EL 80
  • Heavy duty chelated alkaline electro cleaner for ferrous metals.
  • Can be used as a cathodic cleaner for activating passive nickel electrodeposit.
SURFOLIN EC 94
  • Chelated cathodic electro cleaner for Brass and Copper alloys.
  • Very good cleaning action.
SURFOLIN MZ 82
  • Used as a soak and elecrolytic cleaner on variety of metals. Ideal for zinc base diecasting and brass parts.
SURFOLIN BC 538
  • Good cathodic cleaner for copper and brass.
  • Can also be effectively used as a anodic cleaner for copper and brass.
SURFOLIN EL 381
  • Effective in removing tenacious scale produced by carburizing, case hardening and heat treated steel parts.
  • Reduces the time required to achieve a clean metal surface.
ELECTROLYTIC ALKALINE DERUSTING
SURFOLIN NC 924
  • An electrolytic scale and rust remover.
  • Very good substitute for anodic acid etches. Very good cleaner prior to electroless Nickel on steel.
  • Non cyanide cleaner.
SPRAY CLEANER
SURFOLIN SP 167
  • Heavy duty chelated alkaline cleaner for ferrous metals.

ACID PICKLING &BRIGHTENING
ACITEK 707
  • Replaces hazardous Hydrofluoric acid.
  • Added to the acid dip prior to plating to remove silicate film.
  • Also used as an additive to pickling baths and smut removal for aluminium alloys, stainless steel and titanium.
ACITEK 730
  • A dry acid salt used for making acid dips for removal of silicate and oxide films from ferrous and non ferrous metals to get better adhesion of subsequent electrodeposits.
ACID INHIBITOR 3
  • An excellent inhibitor specially developed for Hydrochloric acid, Sulphuric acid pickling bath for steel to reduce the base metal attack during pickling. Suitable before zinc plating.
ACID INHIBITOR 4
  • An excellent inhibitor specially developed for Hydrochloric acid, Sulphuric acid pickling bath for steel to reduce the base metal attack during pickling. Suitable before nickel plating.
ACITEK FR
  • Supresses fume during pickling.
  • Aids in uniform pickling action.
  • Emulsifies the oil carryover from alkaline soak cleaner.
FUME REDUCER 194
  • Used extensively in hot cyanide copper plating bath with no problems like nodular growth at the edges.
  • Exceptionally stable in highly alkaline solution without salting out and bath cloudiness.
KEMBRITE BC 20
  • Brightening dip for brass & copper components. Smoothen the component and thus can produce glossy finish.
  • A dip of 5% Sulphuric acid is used after BC 20 to get a glossy finish.

CYANIDE COPPER
CUPRATEK ROCHELE COPPER
  • Produces smooth deposits.
  • Ideally suitable for Zinc base diecastings.
CUPRATEK ALC
  • Produces smooth bright deposits specially used for high current density operations.
  • Best product for barrel plating on zinc base diecast components.
BRIGHT ACID COPPER
CUPRAMAX AC 2682
  • Provides wide brightness range.
  • Bath can be operated at wide bath temperature range 20 – 35 OC.
  • Good bright throwing power.
CUPRAMAX AC 2082
  • High performance bright acid copper bath. Exceptional brightness and levelling.
  • Highly ductile and extremely bright deposits.
CUPRAMAX AC 9282
  • Shows excellent levelling, coupled with good throwing power.
  • Highly ductile and extremely bright deposits.
CUPRAMAX AC 9100
  • Single addition agent specially for plating of printing cylinders.
  • Produce deposits of excellent ductility, brightness and hardness.

BRIGHT NICKEL
MAGNUM 897
  • A high performance addition agent system formulated to give very good degree of levelling, brightness, coverage and chrome receptivity.
  • Suitable for vat and barrel plating.
  • Very fast brightening and levelling properties.
HALLMARK B 30
  • Good brightening and levelling. Very ductile deposits.
  • Deposits are white in colour and pleasing in appearance.
  • Extremely good for barrel plating.
HALLMARK AS 26
  • HALLMARK AS-26 process is an ultra high performance addition agent system for bright nickel plating.
  • The process has been formulated to give superior levelling, brightness, coverage,and better chrome receptivity.
HALLMARK AS 226
  • HALLMARK AS-226 process is an ultra high performance addition agent system for bright nickel plating.
  • The process has been formulated to give superior levelling, brightness, coverage and better chrome receptivity.
METAKURE 834/842
  • A purifier for Bright Nickel solutions to improve tolerance to metallic impurities like dissolved Copper and Zinc.
TRIPLE ACTION 300
  • An extra-ordinary product which gives high tolerance to metallic impurities like Zinc and Copper and improves throwing power.
DUPLEX, TRIPLEX & MICROPOROUS NICKEL
CLASSIC SEMI BRIGHT NICKEL
  • The new classic semibright nickel process is based on advanced technology designed to produce high corrosion resistant semi bright nickel deposit.
  • Ideal for duplex nickel and triplex nickel plating system which has a special advantage providing millivolt difference more than 120mv.
NIPURA TRI NICKEL
  • Used as an intermediate layer between semibright and bright nickel deposit.
  • Provides high sulphur nickel deposit below the Bright Nickel to prevent pit type corrosion to the base metal
TEKNOPOROUS NI 1209
  • New advanced technology designed to produce higher corrosion resistance compared to single/double nickel layer system.
  • Very receptive to chrome. Need special equipment.
SATIN NICKEL
SILKEN NICKEL
150 K
  • Process has been developed to produce non-glaring rich silky, stain-free, attractive, Satin Nickel deposits.
  • Deposits have a good chrome reception to give an anti-tarnish topcoat to the products.
SILKEN NICKEL
549
  • Developed to produce non glaring, , stain-free attractive satin Nickel deposits.
  • Suitable for rack plating only.
  • Various satinizing effects can be achieved by varying Silken Ni additive 549 concentration.

SKYLARK TCM PROCESS (CHROME LIKE)
SKYLARK TCM
  • Bright deposit colour resembles chrome colour.
  • Excellent covering power & thus suitable for barrel plating.
KEMKOTE PROCESS (ANTIQUE PROCESS)
KEMKOTE
  • Anthracite finish.
  • Higher corrosion resistance.
  • Easy to control the bath parameters by individual analysis.
  • Excellent abrasion resistance.

ACITEK 220 FL
  • A very good activating bath prior to normal chrome bath to activate the passive Bright nickel.
  • Eliminates the white patch problem in subsequent chrome deposits.
SUPERSTAR HARD CHROME
  • Hardness upto 1100 VPN.
  • Non etching ,Very smooth and bright deposit direct from tha bath.
  • Micro crack deposit greater than 40 cracks/mm. Higher efficiency (23 – 26%).
SUPERSTAR AQ 50
HARD CHROME
  • Hardness upto 1100 VPN.
  • Non etching.Very smooth and bright deposit direct from the bath.
  • Micro crack deposits greater than 40 cracks/mm. Higher efficiency (23 – 26%).
HT CHROME
  • A new generation decorative process having novell catalyst system.
  • Produces pleasing blue coloured deposit. Excellent Chrome coverage.
MISTONIL
  • Fume reducer for all types of chrome plating baths to suppress the fumes.
  • Provides good foam blanket.
MISTONIL L
  • Specially recommended for hard chrome plating baths to suppress the fumes.
MISTONIL ECL
  • Foam reducer specially recommended for decorative chromium industry.
ARMOUR H. S. CHROME
  • High speed chrome bath with mixed soluble catalyst, suitable for both hard chrome and decorative chrome.
    Self regulating chrome process with good covering and throwing power.
MICROSTAR
  • Gives haze and cloud free finish.
  • Can acheive desirable microcrack in 5 min. Easy control and maintenance.

CYANIDE ZINC PLATING PROCESS
TEKNOBRITE CZ 1320
  • Excellent brightner system for medium and high Cyanide Zinc bath.
  • Good low current density brightness suitable for barrel plating.
  • Works well with low dosage. Can work at high temperature.
TEKNOBRITE CZ 2380
  • Extra ordinary uniform brightness. Suitable for medium to low cyanide bath. Better temperature tolerance.
  • Suitable for both rack and barrel.
TEKNOBRITE LCZ 2225
  • Ultra high performance cyanide zinc system for extremely low cyanide.
  • Has good temperature tolerance and ideal for barrel plating.
  • Stable brightener system.
  • Suitable for both vat and Barrel plating.
TEKNOBRITE CZ 1365
  • Excellent brightner system suitable for low, medium and high Cyanide Zinc baths . Good low current density brightness and hence suitable for barrel plating.
  • Can work at high temperature.
TEKNOBRITE CZ 777
  • An outstanding processs giving excellent low current density brightness and trouble free plating of irregular shapes.
  • Highly stable type additive.
  • Bath tolerant to high carbonate concentrations than competitive products.
  • Process good for high cyanide baths.
ACID ZINC PLATING PROCESS
TEKNOBRITE AZ 3245
  • Outstanding brilliant, level, ductile zinc deposits.
  • TEKNOBRITE AZ 3245 additive and brightner have very good solubility, no oil out ,even at higher temperatures.
  • This process has an improved yellow chromate adhesion.
  • The process can plate easily complex shapes in vats and also good for barrel.
TEKNOBRITE
AZ 1098
  • A highly stable brightner system. Brightners have excellent bath solubility.
  • Most suitable for vat and continuous wire plating.
  • Produces excellent haze free bright deposit.
TEKNOBRITE AZ 5068 MT
  • The process has excellent brightness and ideal for barrel and rack plating.
  • TEKNOBRITE AZ 5068 additive and brightener have good solubility and can operate even at higher temperatures.
TEKNOBRITE AZ 1068
  • A high performance low foaming chloride zinc process.
  • Very economical process.
  • Process can operate regularly under warm conditions, no oil out problem.
  • Fully water soluble additive system. Excellent passivation adhesion.
ALKALINE NON-CYANIDE ZINC PROCESS
MILLENIUM NCZ
1221
  • Deposits produced are fully bright, levelled and ductile over a broad current density range and can be used for both vat & barrel.
  • Excellent distribution and covering power. No costly equipment required.
  • Produces very ductile deposits and eliminates the problem of delayed blistering.
MILLENIUM NCZ – 511
  • A unique technology for alkaline, cyanide-free zinc plating.
  • Deposits produced are bright, and ductile over a broad current density range .
  • Used for both vat & barrel applications. Good thickness distribution and covering power.
  • Very ductile deposits and no problem of delayed blistering.
MILLENIUM NCZ – 911
  • Produces very ductile deposits and no problem of delayed blistering.
  • Deposits produced are bright, levelled and ductile over a broad current density range and can be used for both vat & barrel .
  • Excellent distribution and covering power.
MILLENIUM HS -1321
  • Deposits produced are fully bright, levelled and ductile over a broad current density range, can be used for both vat & barrel.
  • Excellent distribution and covering power. Unique technology for non-cyanide zinc plating to achieve much higher thickness at normal current density.

HEXAVALENT CHROMATE
KEMPAS BL 15
  • Hexavalent blue passivation on zinc coatings for better corrosion resistance.
KEMPAS IR 752
  • Produces Hexavalent yellow iridescent chromate layer over zinc for better corrosion resistance.
KEMPAS OLIVE 862
  • Produces Hexavalent olive green chromate conversion coatings on zinc deposits. Corrosion resistance of over 150 hours in salt spray.
KEMPAS BK 66
  • Produces a Hexavalent uniform jet black coating on zinc deposits.
  • Good abrasion resistance .
  • Use chloride free demineralised water.
KEMPAS NL 68
  • Consistently produces eye appealing Blue finish.
KEMPAS ZR
  • Produces Hexavalent jet black coating on zinc-iron plating.
  • Good corrosion and abrasion resistance. Being silver-free, it is comparatively economical.
TRIVALENT CHROMATE
KEMPAS BL 1600
  • Trivalent chrome passivation process designed to give blue chromate conversion coating.
  • Provides good corrosion resistance withstands 50 – 60 hours salt spray.
KEMPAS BL 2500
  • Clear blue trivalent chrome passivation on zinc deposit.
  • Provides good deep blue colour.
KEMPAS BL 2800
  • Trivalent blue chrome passivation on zinc deposit
  • Provides good corrosion resistance withstands 70 – 80 hours salt spray.
KEMPAS TRT 1700
  • Thick chromate Trivalent white coating.
  • Very high corrosion resistance120 – 150 hrs. Good thermal resistance.
KEMPAS TRH 350
  • Rich deep iridescent coating giving excellent corrosion resistance.
KEMPAS TRH 1280 A
  • Thick greenish yellow iridescent chromate conversion coating.
  • Provide very good corrosion reistance.
  • Can be used for blue finish at lower concentration.
  • Can further increase corrosion resistance by adding KEMPAS TRH 1280 B
KEMPAS TR 375 A
  • Rich deep iridescent coating giving excellent corrosion resistance.
  • Withstands over 140-150 hrs salt spray.
  • Can futher increase corrosion resistance by adding KEMPAS TR 375 B.
KEMPAS BZ 174 AB
  • Provides bright black passivation film for alkaline zinc rack.
  • Silver free process.
  • Salt spray over 100 hrs.
  • Passivation should be sealed with DUROSEAL 78.
KEMPAS BZ 625 JK
  • Trivalent black passivation for alkaline zinc barrel .
  • Passivation should be sealed with DUROSEAL 76.
KEMPAS BZ 171 AB
  • Provides uniform bright black passivation film on zinc deposit.
  • Passivation should be sealed with KEMPAS BZ171 C.
KEMPAS BZ 625 FG
  • Trivalent black passivation for chloride zinc for rack and barrel.
  • Passivation should be sealed with DUROSEAL 76/ 78.
KEMPAS NBL 18
  • Produces clear white chromate coating on zinc nickel deposit.
KEMPAS YK 85
  • Produces iridescent yellow chromate coating on zinc nickel deposit.
KEMPAS BK 509 AB
  • Produces uniform ,bright black passivation film on zinc-nickel deposit.
KEMPAS BK 57 AB
  • Produces uniform, bright black passivation film on zinc-iron deposit.

DUROSEAL 4500
  • A unique process for improving the corrosion resistance of clear chromate coating.
    Suitable for both vat & barrel operations. No clogging of holes and threads.
DUROSEAL 7500
  • Improves protection against corrosion of Zinc chromate coatings.
    Does not leach the passivation coating. Suitable for Vat & Barrel applications.
DUROSEAL 70
  • DUROSEAL 70 gives good corrosion resistance. DUROSEAL 70 can be applied on clear and yellow chromate passivations.
DUROSEAL 72
  • DUROSEAL 72 gives good corrosion resistance.
    DUROSEAL 72 doesn’t contain Cr VI.
DUROSEAL 76
  • Suitable for Barrel applications.
    Applied only on black chromate coatings. Improves corrosion resistance.
DUROSEAL 78
  • Suitable for Rack applications.
    Applied only on black chromate coatings. Easy to operate.
    Improves corrosion resistance.

DUROGAURD 2200
  • A unique organic coating for improved corrosion of zinc coated parts.
  • Transparent water based coating It gives a very thin effective film
  • Suitable for both Vat & Barrel parts

KEMKOTE BK 155
  • The process produces wide range of attractive colours on copper and copper alloys.
KEMBLACK AUTO
  • A room temperature immersion blackening process for iron and steel.

DEGREASER
SURFOLIN AL 26
  • A non-silicate, mildly alkaline soak cleaner used for either non-etch or mild etch cleaning.
  • Excellent cleaning power, almost no loss of material and brightness from base metal.
ALUMAX ACID CLEAN
MA
  • An acid concentrate specially designed for immersion or spray cleaning of Aluminium or its alloys.
  • Avoids the smut, as the result of the alkaline cleaning .
MATT / SATIN
SURFOLIN E 204
  • An unique alkaline product which produces an ultra fine etch on aluminium to a satin bright finish.
  • Serves as a low cost substitute for chemical polishing.
ETCHING
ALUMAX
SMOOTHENING ADDITIVE
  • A liquid alkaline additive for aluminium etchant.
  • Prevents formation of scales on tank surfaces and heating elements.
ALUMAX ETCH FUME SUPPRESSANT
  • Used to suppress fuming in alkaline pickling baths.
CHROMATING
ALPHOS CRL
  • It is Chrome free clear coating.
  • It has good adhesive properties to provide bonding for subsequent powder coating and painting.
  • It gives corrosion resistance.
ALCROM
  • ALCROM is an acidic liquid product used for the yellow chromating process over Aluminium and its alloys.
  • Producing wide range of iridescent finishes on the surface.
  • This chromate conversion coating can be used as a undercoat for powder coating or painting.
  • A final finishing on Aluminum for corrosion resistant and decorative purposes.
ALFOSCROM H
  • Conversion coating with ALFOSCROM PROCESS produce a Chromium Phosphate Coating on the Aluminum Surfaces rise up the corrosion resistance and also improving the paint adherence on the Aluminum surface.
ALCHROME TRI 30
  • Trivalent chromium base passivation for aluminium.
  • Excellent bare corrosion protection.
  • Also works on alloyed and casted aluminium.
  • Suitable as pretreatment before lacquering, powder coating and gluing.
  • Heat resistant up to 100 OC with minimal loss in corrosion resistance.
ANODIZING
ALUMAX ANO FUM 12
  • Prevents spurting of anodizing bath over contacts and cathodes. Thus eliminates corrosion of the same.
ALUMAX ANO ES 24
  • This is energy saving additive to conventional sulphuric acid anodizing bath.
  • It allows operating at a higher temperature & lower current density. It will produce nearly uniform film thickness.
ELECTROCOLOURING
ALUMAX EC SALT 205
  • Designed for the electrolytic coloring on anodized Aluminium articles.
  • Gives perfect and even dispersion in-depth to color the article.
ALUMAX EC STABILISER
  • An acidic concentrate to suppress oxidation of tin-II to tin-IV in Electrocolouring baths.
DYES
INORGANIC DYES
  • UV and weather resistant Gold color in various shades.
  • Can be dyed on tin electro color to give various colors.
ORGANIC DYES
  • For Light and weather resistant metallic dyes.
  • We offer Dyes suitable for aluminium building components.
SEALING
ALUMAX COLD SEALING SALT CS
  • Works at low temp. It converts Oxide into Boehmite.
  • It has a special positive aging effect.
  • It gives energy saving sealing for anodized surface.
ALUMAX COLD SEALING CS LIQUID
  • Works at low temp. It converts Oxide into Boehmite.
  • It is a long-life sealing bath.
  • It gives energy saving sealing for anodized surface.